Edit1 Description
The
Maximum diagnostics setting for server logging is an option on the property of the local server. There is an even higher level of diagnostic logging called
Maximum Complete Logging. The logging is very verbose and will consume a great deal of disk space. It should only be left enabled when it is needed.
Edit1.1 How to Set Maximum Complete Logging
The
itrezzoAgent Administrator does not provide any visual indicators of Maximum Complete Logging. The special logging mode is usually enabled at the request of an itrezzo technical support advisor. The following instructions can be used to enable this debug logging.

Complete Logging
To turn on "Maximum Complete" Logging level:
- Open the itrezzoAgent Administrator.
- Select the Servers container.
- Get the properties for a server (Right click or double click on a server in the server’s container).
- Click on the Configuration tab
- You should see the dotted outline on the tab title (as show in the diagram show here.)
- Click Ctrl+L.
- You will get a prompt to turn on Complete logging.
- Answer Yes to turn on Complete logging
Note:
Maximum Complete in the logging area. When
Complete is set, you will see the radio button for
Maximum change to
Maximum Complete.
Edit1.2 How to Turn off Maximum Complete Logging
After testing is complete, it is important to disable the verbose logging.
- Open the itrezzoAgent Administrator.
- Select the Servers container.
- Get the properties for a server (Right click or double click on a server in the server’s container).
- Select the Medium logging option.
- Click OK
Edit2 Other Trace Logging
The
BPE process has additional diagnostic capability. Refer to the
BPE Debugging Wiki for moe information.